LEATHER-LINE
LL ROMBO 40 Nero matt
LEATHER-LINE
Product characteristics
LL ROMBO 40 Nero matt
Colour variants
Panel photo
Product characteristics
Product characteristic
non adhesive (NA)
self adhesive (SA)
Item number
15014
15029
Format
2600x1000x5 mm
2600x1000x5,24 mm
Surface material
PU-Leather
PU-Leather
Base material
HIPS, PE foam
HIPS, PE foam
Back side material
Adhesive Layer
Material thickness mm
3,8 mm
4,04 mm
Max. relief height in mm
5 mm
5,24 mm
Temperature stability in °C
up to 50 °C
up to 50 °C
Wet room suitability
Rolled packable
Smallest bending radius
300 mm
300 mm
Weight in kg / piece
4,1
4,7
Pattern Gradient
No design course
No design course
Flammability
DIN 4102 - B2
DIN 4102 - B2
Machine-related dimensional and angle tolerances
+/- 2.0 mm in relation to 1,000 mm
+/- 2.0 mm in relation to 1,000 mm
Temperature-related dimensional deviations
+/- 0.7mm to 1,000 mm at temperatur change of 10°C
+/- 0.7mm to 1,000 mm at temperatur change of 10°C
Protection foil
GTIN-Code
9002582150143
9002582150297
Customs tariff number
39219060
39199080
Processing
Processing
non adhesive (NA)
self adhesive (SA)
Cutting
Punching
Drilling
Sawing
Milling
Laser cutting
Hot bending
PVA compressible
Extra equipment
Extra equipment
non adhesive (NA)
self adhesive (SA)
Special formats
Further thicknesses
Cuttings
Magnetic available
PVA treatment orderable
Special colors
On request
On request
Further variants
EN13501-1 Flammability orderable
ASTM E84 Flammability orderable
Accessories
Accessories
non adhesive (NA)
self adhesive (SA)
Glue recommendation
Putty adhesive with toothed spatula A2
not necessary
Matching Edges
Matching Profiles
Cleaning
Do not use abrasive cleaners, solvent cleaners or pure alcohol! Clean leather surfaces by means of standard liquid soap and then remove the soap with a humid cloth.
Processing guidelines
Please refer to the technical tables to see whether the respective processing is possible.
The interactive table is only available on the desktop. Please view this page on a desktop PC.
Product group
Base Material
Variation
Expansion joint
Processing
LEATHER-LINE (LL)
absorbent
plasterboard, smoothed brickwork, raw MDF or chipboard etc.
NA
non-adhesive design sheet
Glutolin UK, Bostik Ardaflex® Multi (tooth spatula A2, B3)
putty adhesive
PVA Glue Pressing
PVA pre-treatment is necessary. Balancing sheet and PVA pre-treatment are avaliable at SIBU or roughering by means of sandpaper
non-absorbent
Glass, coated MDF, etc.
SA
self-adhesive design sheet
Processing
LL ROMBO 40 Nero matt
Downloads
[]