SL OCEAN processing and mounting

Jemand montiert, auf einer Leiter stehend, auf eine weiße Rückwand blau-grün spiegelnde SIBU DESIGN Dekorpaneele.

Our STRUCTURE-LINE has another highlight: SL OCEAN lives up to its name and convinces not only with its untamed wave-like structure but also with a mirror surface that provides special light and colour effects.

Due to the pattern, mechanical assembly (screws, spacers) is generally recommended.

Applications in the ceiling area must be attached mechanically.

Material Requirements

SL OCEAN design panel (self-adhesive or non-adhesive)
Depending on the type of mounting: screws, MS polymer, spacers, strongly adhesive double-sided tape.

Wall Mounting

Bonding:

Self-adhesive SL OCEAN SA design panel
With MS polymer (slightly lower adhesive consumption with bead application along the panel width).

Jemand trägt Silikonraupen im Abstand von ca. 10 cm auf die Rückseite einer SIBU DESIGN Dekorplatte auf. Links daneben befindet sich eine rechteckige Skizze mit Silikonraupen im regelmässigem Abstand.

Mechanical mounting:

With screws or spacers. For mounting with screws, pre-drilling of the panel and use of round head screws is recommended!

Pre-drilling: Drill diameter = screw diameter + 1mm

Temporary mounting: (e.g.: use in shopwindow):
Design panels can also be mounted with tacker (staple)

Jemand tackert eine blau gelb spiegende SIBU DESIGN Dekorplatte fest.

Ceiling Mounting

Applications in the ceiling area must be mounted mechanically.

Due to the structure, mechanical mounting (screws, spacers) is generally recommended.

Mechanical mounting:

With screws/ spacers (mounting at 15 points recommended).
Screwing on a stable substrate (e.g.: substructure of plasterboard, substructure of MDF or directly on MDF from a thickness of 16 mm, concrete, ….)

Pre-drilling: Drilling diameter = screw diameter + 1mm.

Dekorplatten die mit silberen Schrauben in einem Abstand von ca. 4 cm auf einem Untergrund montiert sind. Links daneben eine Skizze mit 15 schwarzen Punkten im Raster. Bildunterschrift passend zum Bild in englischer Sprache

Mechanical assembly with gluing:

In combination with mechanical mounting, the design panel can be additionally glued with MS polymer or self-adhesive panels can be used.

ATTENTION: For easier mechanical assembly, strongly adhesive double-sided tape can be used for short-term fixation of the decorative panels.

Possible Finishes

Spiegelnde quadratische Muster in den Farben Anthracite, geld rosa schimmernd und neutral silver

Flame retardant version (FR):
FR version is possible for the colour variants Hollywood, Silver, Anthracite.

Hand mit Stahlwolle auf Anthracite farbigem Spiegel

Scratch resistant version (AR):
SL OCEAN decor panels are highly scratch resistant in the Anthracite colour variant.
Other colours available on request (AR)

Rückseite eines selbstklebenden Muster, die hellbraune Schutzfolie wurde am rechten Eck etwas abgezogen

Self-adhesive finish (SA):
A self-adhesive finish can be made for all four colour variations. The reverse side of the SA decor panels is coated with high-quality and highly adhesive K66 glue. The design panels can be glued to absorbent and non-absorbent substrates during wall mounting without additional adhesive.